FixVault
Home › Buick › 2018 › Envision Base › Repair and Diagnosis › Steering › Power Steering System › Diagnostic Information and Procedures › DTC C047A › Circuit/System Verification

Circuit/System Verification

  1. Verify that DTC C047A is not set.
    • If the DTC is set 
    1. Perform the Steering Wheel Angle Sensor Centering .
    2. Verify the DTC does not reset.
      • If the DTC resets, replace the K43 Power Steering Control Module.
      • Go to next step: If the DTC does not reset
    3. All OK.
    • Go to next step: If the DTC is not set 
  2. All OK.
About FixVault