FixVault
Home › Buick › 2018 › Envision Base › Repair and Diagnosis › Transmission › Automatic Trans › Power Transfer Unit/Transfer Case - AAM › Repair Instructions - On Vehicle › Intermediate Drive Shaft Replacement › Removal Procedure

Removal Procedure

  1. Power Transfer Unit Cover to Intermediate Drive Shaft Seal Replacement  - Remove
  2. GM3958699Courtesy of GENERAL MOTORS COMPANY

    Remove and Discard the intermediate drive shaft retainer (1) from the transfer case.

  3. Pull the intermediate drive shaft (2) out of the transfer case.
About FixVault