FixVault
Home › Buick › 2018 › Envision Base › Repair and Diagnosis › Transmission › Automatic Trans › Power Transfer Unit/Transfer Case - AAM › Repair Instructions - On Vehicle › Transmission Brace Replacement › Installation Procedure

Installation Procedure

  1. GM4004131Courtesy of GENERAL MOTORS COMPANY

    Position the transfer case brace (3) to the engine.

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the starter bracket (2) and bolt (1) and tighten to 22 N.m (16 lb ft).
  3. Install the transfer case brace to engine bolts (5) and tighten to 58 N.m (43 lb ft).
  4. Remove the transfer case brace bolts (4) and tighten to 22 N.m (16 lb ft).
About FixVault