FixVault
Home › Buick › 2018 › LaCrosse Base › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Battery Current Sensor Replacement (Without KL9) › Removal Procedure

Removal Procedure

  1. Reposition the left side rear compartment side trim panel. Rear Compartment Side Trim Replacement - Left Side (With LHN)Rear Compartment Side Trim Replacement - Left Side (With LGX)
  2. Disconnect the negative battery cable. Battery Negative Cable Disconnection and Connection (Without KL9) 
  3. GM4738782

    Electrical Connector (2) @ Battery Current Sensor (1) - Disconnect

  4. GM4738784

    Battery Negative Cable Ground Nut (1) - Remove

  5. Battery Negative Cable (3) - Remove
    6. NOTE:

    Note the orientation of the battery current sensor prior to removal.

  6. Battery Current Sensor (2) - Remove
About FixVault