FixVault
Home › Buick › 2018 › LaCrosse Base › Repair and Diagnosis › Hybrid/Electric Powertrain › Electric Converters and Controllers › Hybrid/EV Control System › Diagnostic Information and Procedures › DTC P0C01 › Circuit/System Verification

Circuit/System Verification

  1. Verify DTCs P0BE6, P0BE7, P0BE8, P0BEA, P0BEB, P0BEC, and P0BFD are not set.
  2. If the DTC is set, clear DTC; Turn the ignition OFF for 2 minutes. Turn the ignition ON, Operate vehicle within conditions for running and setting DTC. If the DTC resets, go to Circuit/System Testing.
About FixVault