FixVault

Circuit/System Verification

  1. Verify that no other DTCs are set except for DTC P15FC.
    • Go to next step: If only DTC P15FC is set 
  2. Replace the component: K114B Hybrid/EV Powertrain Control Module 2
  3. Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the freeze Frame/Failure Records data.
  4. Verify the DTC does not set.
    • If the DTC sets 

      Replace the component: K59 Starter/Generator Control Module

    • Go to next step: If the DTC does not set 
  5. All OK.