FixVault
Home › Buick › 2018 › LaCrosse Base › Repair and Diagnosis › Suspension › Wheel Alignment › Wheel Alignment System › Repair Instructions › Rear Camber Adjustment

Rear Camber Adjustment

  1. GM4485091

    Rear Suspension Lower Control Arm Inner Nut (1) - Loosen

  2. GM4485097

    Rotate the rear suspension lower control arm adjust bolt (1) until the correct camber measurement is achieved. Wheel Alignment Measurement 

    NOTE:

    Tighten the nut and bolt enough to maintain the adjustment. Verify the camber reading prior to tightening the bolt to its final torque.

  3. GM4485091

    Hold the rear suspension lower control arm adjust bolt and tighten the rear suspension lower control inner nut (1). Lower Control Arm Replacement

  4. Check the alignment specification and readjust if necessary. Wheel Alignment Specifications 
About FixVault