Fastener Specifications
WARNING: This page is about a different car, the 2020 Buick Regal TourX, 2020 Buick Regal, 2019 Buick Regal TourX, and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Brake Caliper Piston Dust Boot |
| Brake Caliper Piston Seal |
| Front Brake Hose Washer |
| Front Disc Brake Pad Retaining Spring |
| Rear Brake Hose Washer |
| Rear Brake Shoe Hold Down Spring |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Caliper Guide Pin Bolt - Front J60, J17 | 47 N.m (35 lb ft) |
| Brake Caliper Guide Pin Bolt - Rear GNC, GNQ | 35 N.m (26 lb ft) |
| Brake Caliper Bleeder Valve J60, J17 | 10 N.m (89 lb in) |
| Brake Caliper Bleeder Valve J60 | 17 N.m (13 lb ft) |
| Brake Hose Fitting Bolt | 40 N.m (30 lb ft) |
| Front Brake Caliper Bolt JQ5 | |
|
150 N.m (111 lb ft) |
|
15-30 degrees |
| Front Brake Caliper Bracket Bolt | |
|
150 N.m (111 lb ft) |
|
15-30 degrees |
| Front Brake Rotor Bolt | 9 N.m (80 lb in) |
| Rear Brake Caliper Bracket Bolt GNC, GNQ | |
|
100 N.m (74 lb ft) |
|
15-30 degrees |
| Rear Brake Rotor Bolt | 9 N.m (80 lb in) |