Fastener Specifications
WARNING: This page is about a different car, the 2020 Buick Regal TourX, 2020 Buick Regal, 2019 Buick Regal TourX, and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Differential Carrier Insulator Bolts | |
|
100 N.m (74 lb ft) |
|
plus 30 to 45 degrees |
Reusable Threaded Fastener Tightening Specifications
| Application | Specification |
|---|---|
| Metric (English) | |
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
| Differential Carrier Insulator Bolts | |
|
80 N.m (59 lb ft) |
|
60-75 degrees |
| Differential Clutch Cover Plug | 12 N.m (106 lb in) |
| Differential Clutch Drain Plug | 12 N.m (106 lb in) |
| Limited Slip Differential Clutch High Pressure Pipe | 24 N.m (18 lb ft) |
| Lubricant Drain Plug | 39 N.m (29 lb ft) |
| Lubricant Fill Plug | 39 N.m (29 lb ft) |
| Rear Differential Clutch Control Module Bolts | 6 N.m (53 lb in) |