FixVault
Home › Buick › 2018 › Regal GS › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 3.6L (LGX) - Repair Instructions › Repair Instructions › Throttle Body Assembly Replacement › Installation Procedure

Installation Procedure

  1. GM4487693Courtesy of GENERAL MOTORS COMPANY

    Throttle Body Gasket(2) - Install NEW

  2. Throttle Body(1) - Install
  3. GM4487690Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Throttle Body Bolt(2) - Install and tighten[4x] 10 N.m (89 lb in)

  4. Electrical Connector(1) - Connect
  5. Air Cleaner Outlet Duct - Install - Air Cleaner Outlet Duct Replacement 
  6. Perform the Throttle Body Idle Air Flow Compensation Reset. Throttle Body Idle Air Flow Compensation Reset 
About FixVault