FixVault
Home › Buick › 2019 › Encore Base › Repair and Diagnosis › External Pages › Different car › Section 3 (HVAC System - Automatic) › Repair Instructions › Mode Control Cam Actuator Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection (without KL9)Battery Negative Cable Disconnection and Connection (with KL9)
  2. Steering Column Assembly - Remove - Steering Column Replacement (Buick, Mexico, NJ1, With BTM, With N06)Steering Column Replacement (Buick, Canada/United States, NJ1, With BTM, Without N06)Steering Column Replacement (Chevrolet, Mexico, NJ1, With BTM, With N06)Steering Column Replacement (Chevrolet, Canada/United States, NJ1, With BTM, Without N06)Steering Column Replacement (Chevrolet, Canada/United States, NJ1, Without BTM, Without N06)Steering Column Replacement (Chevrolet, Mexico, NJ1, Without BTM, Without N06)Steering Column Replacement (Mexico, N40)
  3. GM4421242

    Mode Control Cam Actuator Bolt(1) - Remove[2x]

  4. Mode Control Cam Actuator(2) - Remove
  5. Disconnect the electrical connector.
About FixVault