FixVault
Home › Buick › 2019 › Encore Base › Repair and Diagnosis › External Pages › Different car › Section 72 (Power Steering System) › Repair Instructions › Power Steering Pump Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove as much power steering fluid from the power steering fluid reservoir as possible.
  2. Air Cleaner Assembly - Remove - Air Cleaner Assembly Replacement (2H0)
  3. Power Steering Pump Belt - Remove - Power Steering Pump Belt Replacement
  4. GM2807341

    Power Steering Fluid Reservoir Outlet Hose Clamp(1) - Disengage

  5. Power Steering Fluid Reservoir Outlet Hose(2)@Power Steering Pump - Remove
  6. Power Steering Gear Inlet Hose(3)@Power Steering Pump - Remove
  7. Power Steering Gear Inlet Hose Seal(4) - Remove

    DISCARD the seal.

  8. Air Conditioning Evaporator Hose Assembly - Remove - Air Conditioning Evaporator Hose Assembly Replacement (2H0)Air Conditioning Evaporator Hose Assembly Replacement (LUV)Air Conditioning Evaporator Hose Assembly Replacement (LE2)
  9. GM2807986
    NOTE:
    • The power steering pump pulley does NOT need to be removed on vehicle. The pulley is shown off for clarity.
    • Remove the power steering pump bolts through the holes in the pulley.

    Power Steering Pump Bolt(1) - Remove[2x]

  10. Remove the power steering pump (2) from the vehicle.
  11. Transfer components as necessary.
About FixVault