Circuit/System Verification
WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify the scan tool Immobilizer Allows Engine to Start parameter is Valid when using each vehicle key.
- If Authentication Error NOTE:
Perform the appropriate key procedures for this vehicle. Not all vehicle models and years are the same.
Replace the keys.
- Go to next step: If Valid
- If Authentication Error
- Verify DTC B3935 does not set while operating the vehicle under the conditions for running the DTC.
- If the DTC is set
Replace the K9 Body Control Module.
- Go to next step: If the DTC is not set
- If the DTC is set
- All OK.