Circuit/System Verification
WARNING: This page is about a different car, the 2018 Chevrolet Trax and 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify the stop lamps turn ON and OFF while applying and releasing the brake pedal.
- If the stop lamps do not turn ON and OFF
Refer to Symptoms - Lighting .
- Go to next step: If the stop lamps turn ON and OFF
- If the stop lamps do not turn ON and OFF
- Verify the Brake Pedal Position Sensor or the brake pedal are not binding causing residual brake pressure to be detected, while the brake lights operate properly.
- If a condition is found
Repair or replace the appropriate component.
- Go to next step: If a condition is not found
- If a condition is found
- All OK.