Fastener Specifications
WARNING: This page is about a different car, the 2018 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Differential Carrier Bushing |
| Differential Drive Pinion Gear Seal |
| Rear Axle Shaft Seal |
| Torque Tube Gasket |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Clutch Control Module Bolts/Screws | 10 N.m (89 lb in) |
| Differential-to-Cradle Mount Bolts/Nuts | 100 N.m (74 lb ft) |
| Differential Clutch Oil Drain Plug | 12 N.m (106 lb in) |
| Differential Clutch Oil Fill Plug | 12 N.m (106 lb in) |
| Lubricant Drain Plug | 35 N.m (26 lb ft) |
| Lubricant Fill Plug | 35 N.m (26 lb ft) |
| Torque Tube Bracket-to-Body Bolt | 160 N.m (118 lb ft) |
| Torque Tube-to-Differential Bolts | 29 N.m (21 lb ft) |