FixVault
Home › Buick › 2019 › Envision Base › Repair and Diagnosis › External Pages › Different car › Section 40 (Power Steering System) › Diagnostic Information and Procedures › DTC C0545 › Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2018 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On/Vehicle - In Service Mode
  2. Verify DTC C0545 is not set.
    • If the DTC is set 

      Replace the component: Steering Gear

    • Go to next step: If the DTC is not set 
  3. All OK.
About FixVault