Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

NOTE:
When disconnecting the window regulator, place the window in the full up position, use masking tape to tape the window to the upper door frame.

Position the front side door window regulator rear rail (2) to gain access to remove the door latch and handle bracket assembly. - Disconnect - Front Side Door Window Regulator Replacement
Courtesy of GENERAL MOTORS COMPANY

Front Side Door Window Channel Retainer (2) - Remove - Front Side Door Window Channel Retainer Replacement
Courtesy of GENERAL MOTORS COMPANY

Front Side Door Outside Handle Bracket (1) - Remove - Front Side Door Outside Handle Bracket Replacement

NOTE:
When removing the bracket it is not necessary to disconnect the outside handle cable and lock rod from the bracket. Remove the bracket and latch together then disconnect the cables and lock rod as needed from the latch.
Disconnect the electrical connector.
Courtesy of GENERAL MOTORS COMPANY

Front Side Door Latch Bolt (1) @ Front Side Door Latch - Remove [4x]
Courtesy of GENERAL MOTORS COMPANY

Front Door Outside Handle Bracket (1) @ the Front Side Door Latch (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Side Door Outside Handle Cable (1) - Remove - Front Side Door Outside Handle Cable Replacement
Courtesy of GENERAL MOTORS COMPANY

Front Side Door Inside Handle Cable (1) - Remove - Front Side Door Inside Handle Cable Replacement