Fastener Specifications
WARNING: This page is about a different car, the 2018 Buick Regal TourX and 2018 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Differential Carrier Insulator Bolts | |
|
100 N.m (74 lb ft) |
|
plus 30 to 45 degrees |
Reusable Threaded Fastener Tightening Specifications
| Application | Specification |
|---|---|
| Metric (English) | |
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
| Differential Carrier Insulator Bolts | |
|
80 N.m (59 lb ft) |
|
60-75 degrees |
| Differential Clutch Cover Plug | 12 N.m (106 lb in) |
| Differential Clutch Drain Plug | 12 N.m (106 lb in) |
| Lubricant Drain Plug | 39 N.m (29 lb ft) |
| Lubricant Fill Plug | 39 N.m (29 lb ft) |
| Rear Differential Clutch Control Module Bolts | 6 N.m (53 lb in) |