FixVault
Home › Buick › 2019 › Regal GS › Repair and Diagnosis › External Pages › Different car › Section 93 (Suspension Control System) › Repair Instructions › Electronic Suspension Control Module Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 Buick Regal TourX and 2018 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4742073

    Electronic Suspension Control Module(2) - Install

  2. Electrical Connector(1)@Electronic Suspension Control Module - (2)Connect
  3. GM4742067

    Install the electronic suspension control module (2) until it is fully seated into the electronic suspension control module bracket (1) and secured by the tab as indicated.

  4. Active Safety Control Module@Left Side - Install - Active Safety Control Module Replacement
  5. Program the electronic suspension control module. Control Module References
About FixVault