FixVault
Home › Buick › 2020 › Encore Base › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 1.4L (LUV) - Repair Instructions › Repair Instructions › Ignition Coil Replacement › Removal Procedure

Removal Procedure

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (without KL9) , and Battery Negative Cable Disconnection and Connection (with KL9) .
  2. Remove the engine cover. Refer to Engine Cover Replacement .
  3. GM2508825Courtesy of GENERAL MOTORS COMPANY

    Disconnect the ignition coil wiring harness connector (1).

  4. Remove the 2 ignition coil fasteners (2) from the ignition coil assembly (3).
  5. GM2579391Courtesy of GENERAL MOTORS COMPANY

    Install the EN-6009 remover/installer (1).

  6. Remove the ignition coil (2).
  7. Remove the EN-6009 remover/installer (1).
About FixVault