FixVault
Home › Buick › 2020 › Encore Base › Repair and Diagnosis › Transmission › Power Transfer Unit/Transfer Case - AAM › Repair Instructions - On Vehicle › Transmission Brace Replacement › Installation Procedure

Installation Procedure

  1. GM4818260Courtesy of GENERAL MOTORS COMPANY

    Position the transfer case brace (5) to the engine.

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the starter bracket (2) and bolt (1) and tighten to 22 N.m (16 lb ft).
  3. Install the transfer case brace to engine bolts (3) and tighten to 58 N.m (43 lb ft).
  4. Install the transfer case brace bolts (4) and tighten to 58 N.m (43 lb ft).
About FixVault