FixVault
Home › Buick › 2020 › Envision Base › Repair and Diagnosis › External Pages › Different car › Section 173 (Antilock Brake System) › Repair Instructions › Front Wheel Speed Sensor Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2020 Buick Regal TourX, 2020 Buick Regal, 2019 Buick Regal TourX, and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4214177Courtesy of GENERAL MOTORS COMPANY

    Wheel Speed Sensor (1) - Install

  2. GM4214175Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Fastener Caution

    Wheel Speed Sensor Bolt (1) - Install and tighten 9 N.m (80 lb in)

  3. GM4214174Courtesy of GENERAL MOTORS COMPANY

    Retainer (1) @ Steering Knuckle - Secure

  4. GM4213881Courtesy of GENERAL MOTORS COMPANY

    Retainer (1) @ Front Brake Hose - Secure [2x]

  5. GM4213880Courtesy of GENERAL MOTORS COMPANY

    Retainer (1) @ Side Rail - Secure [3x]

  6. GM4213876Courtesy of GENERAL MOTORS COMPANY

    Retainer (1) @ Radiator Support - Secure

  7. Wheel Speed Sensor Electrical Connector - Connect
  8. Front Wheelhouse Liner - Install - Front Wheelhouse Liner Replacement (LGX) , or Front Wheelhouse Liner Replacement (LTG)
  9. Verify the repair is complete. Diagnostic Repair Verification
About FixVault