Fastener Specifications
WARNING: This page is about a different car, the 2020 Buick Regal TourX, 2020 Buick Regal, 2019 Buick Regal TourX, and 2019 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| CV Boot Clamp |
| Front Wheel Drive Intermediate Shaft Retaining Ring |
| Front Wheel Drive Shaft Retaining Ring |
| O-Ring |
| Rear Wheel Drive Shaft Retaining Ring |
| Retaining Ring |
| Wheel Drive Shaft Washer |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Wheel Drive Shaft Nut | |
|
150 N.m (111 lb ft) |
|
Loosen 45 degrees |
|
250 N.m (199 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Wheel Drive Intermediate Shaft Bracket Bolt | 58 N.m (43 lb ft) |