Fastener Specifications
WARNING: This page is about a different car, the 2018 Buick Regal TourX and 2018 Buick Regal. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Brake Hose Fitting Gasket |
| Brake Pedal Retainer |
| Master Cylinder Seal |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Master Cylinder Nut | 55 N.m (41 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake and Accelerator Pedal Assembly Bolt | 9 N.m (80 lb in) |
| Brake and Accelerator Pedal Assembly Nut | 9 N.m (80 lb in) |
| Brake Hose Bracket Bolt | 9 N.m (80 lb in) |
| Brake Hose Fitting Bolt - Front and Rear | 40 N.m (30 lb ft) |
| Brake Pipe Fitting | 18 N.m (13 lb ft) |
| Brake Pressure Modulator Valve Primary Pipe Fitting | 32 N.m (24 lb ft) |
| Brake Pressure Modulator Valve Secondary Pipe Fitting | 32 N.m (24 lb ft) |
| Master Cylinder Primary Brake Pipe Fitting | 32 N.m (24 lb ft) |
| Master Cylinder Secondary Brake Pipe Fitting | 32 N.m (24 lb ft) |
| Power Brake Booster Bolt | 19 N.m (14 lb ft) |