FixVault
Home › Buick › 2020 › Regal Base › Repair and Diagnosis › Body & Frame › Body, Cab Control Systems › Vehicle Access System › Repair Instructions › Rear Closure Hands Free Module Replacement (Base Bumper)

Rear Closure Hands Free Module Replacement (Base Bumper)

GM4639511Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedure

  1. Battery Negative Cable Disconnection and Connection (3.6L LGX) , or Battery Negative Cable Disconnection and Connection (2.0L LTG)
  2. Raise and support the vehicle. Lifting and Jacking the Vehicle
1 Rear Closure Hands Free Module

Procedure

  1. Disconnect the electrical connectors.
  2. Unlock the retaining tabs.
  3. Lower the vehicle.
  4. Programming and Setup - Control Module References
About FixVault