Circuit/System Testing
- Ignition ON.
- Perform the Service Programming System (SPS)
. The K194 Rear Gate Module should learn the travel limits, exit the calibration mode, and B1C0A 54 will become a history code.
- If the K194 Rear Gate Module does not exit the calibration mode or if B1C0A 54 does not become a history code.
Replace the K194 Rear Gate Module.
- Go to next step: If the K194 Rear Gate Module does exit the calibration mode and B1C0A 54 becomes a history code.
- If the K194 Rear Gate Module does not exit the calibration mode or if B1C0A 54 does not become a history code.
- All OK.