FixVault
Home › Buick › 2021 › Envision Preferred, AWD › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System › Diagnostic Information and Procedures › DTC C053B › Circuit/System Verification

Circuit/System Verification

  1. Ignition - On/Vehicle - In Service Mode
  2. Under normal operating conditions: Verify DTC C053B is not set.
    • If the DTC sets 

      Replace the component: K160 Brake System Control Module

    • Go to next step: If the DTC is not set 
  3. All OK.
About FixVault