Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Starter (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution

Starter Bolt (1) - Install and tighten [3x] 58 N.m (43 lb ft)
If necessary, install the battery negative cable above the starter. Battery Positive and Negative Cable Replacement
Courtesy of GENERAL MOTORS COMPANY

Battery Positive Cable (3) - Install
Battery Positive Cable Nut (4) @ Starter Solenoid (2) - Install and tighten 13 N.m (115 lb in)
Electrical Connector (1) - Connect
Courtesy of GENERAL MOTORS COMPANY

Retainer (1) - Engage
Oil Level Indicator Tube - Install - Oil Level Indicator Tube Replacement
Courtesy of GENERAL MOTORS COMPANY

Install the thermostat bypass hose connector and tighten the thermostat bypass hose bolt (1). Thermostat Bypass Hose Replacement
Courtesy of GENERAL MOTORS COMPANY

Engine Wiring Harness Clip (1) @ Thermostat Bypass Hose (2) - Engage
Front Compartment Air Deflector - Install - Front Compartment Air Deflector Replacement (Base) , or Front Compartment Air Deflector Replacement (1st Design Oil Filter Access) , or Front Compartment Air Deflector Replacement (2nd Design Oil Filter Access)
Lower the vehicle.
Connect the negative battery cable. Battery Negative Cable Disconnection and Connection