Circuit/System Verification

Ignition - On/Vehicle - In Service Mode
Verify that no DTCs are set.
- If any of the DTCs are set
  Refer to Diagnostic Trouble Code (DTC) List - Vehicle
- Go to next step: If no DTC is set
Ignition OFF/Vehicle OFF
Ignition - On/Vehicle - In Service Mode Verify the ABS indicator turns ON and OFF during Instrument Panel Cluster initialization bulb check.
- If the ABS indicator does not turn ON and OFF
  Replace the component: P16 Instrument Panel Cluster Control Module
- Go to next step: If the ABS indicator turns ON and OFF
All OK. A fault is currently not present and may be an intermittent condition.