Removal Procedure
- The steering column
- The intermediate shaft (s)
- The steering gear
- Turn the steering wheel to the straight ahead position and secure the steering wheel from moving.
Intermediate Steering Shaft Middle Bolt (1) - Release
- Intermediate Steering Shaft Lower Bolt (2) - Remove
- Intermediate Steering Shaft (3) @ Steering Gear Pinion Shaft - Disconnect
Intermediate Steering Shaft Upper Bolt (1) - Remove
- Intermediate Steering Shaft (2) @ Steering Column Shaft - Disconnect
- Intermediate Steering Shaft (2) @ Vehicle - Remove
With wheels of the vehicle facing straight ahead, secure the steering wheel utilizing steering column anti-rotation pin, steering column lock, or a strap to prevent rotation. Locking of the steering column will prevent damage and a possible malfunction of the SIR system. The steering wheel must be secured in position before disconnecting the following components:
After disconnecting these components, do not rotate the steering wheel or move the front tires and wheels. Failure to follow this procedure may cause the SIR coil assembly to become un-centered and cause possible damage to the SIR coil. If you think the SIR coil has become un-centered, refer to your specific SIR coil's centering procedure to re-center SIR Coil.