FixVault
Home › Buick › 2022 › Envision Preferred, FWD › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 2.0L (LSY) - Repair Instructions › Repair Instructions › Fuel Feed Intermediate Pipe Replacement › Installation Procedure

Installation Procedure

  1. Fuel Feed Intermediate Pipe (2) - Install NEW
    GM4968308Courtesy of GENERAL MOTORS COMPANY
  2. Fuel Feed Intermediate Pipe Nut (1, 4) - Install and hand tighten
    3. CAUTION:

    Fastener Caution

  3. Fuel Feed Intermediate Pipe Bracket Bolt (3) - Install and Tighten 8.5 N.m (75 lb in)
  4. Fuel Feed Intermediate Pipe Nut (1, 4) - Tighten 30 N.m (22 lb ft)
  5. Evaporative Emission Canister Purge Pump (2) - Install - Evaporative Emission Canister Purge Pump Replacement 
    GM5065760Courtesy of GENERAL MOTORS COMPANY
  6. Air Cleaner Outlet Intermediate Duct - Install - Air Cleaner Outlet Intermediate Duct Replacement 
  7. Pressurize the fuel system and inspect for leaks.
About FixVault