FixVault
Home › Buick › 2023 › Envision Preferred, AWD › Repair and Diagnosis › External Pages › Different car › Section 63 (Antilock Brake System) › Repair Instructions › Front Wheel Speed Sensor Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2021 Buick Envision. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4214177Courtesy of GENERAL MOTORS COMPANY

    Wheel Speed Sensor (1) - Install

  2. GM4214175Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Fastener Caution

    Wheel Speed Sensor Bolt (1) - Install and tighten 9 N.m (80 lb in)

  3. GM5614108Courtesy of GENERAL MOTORS COMPANY

    Retainer (1) @ Steering Knuckle - Secure

  4. {F45} Wiring Harness (2) @ Retainer (1) - Install
  5. GM5613624Courtesy of GENERAL MOTORS COMPANY

    Wiring Harness Grommet (1) - Install [2x]

  6. GM5613623Courtesy of GENERAL MOTORS COMPANY

    Retainer (1) @ Side Rail - Secure [2x]

  7. {F45} Wiring Harness (2) @ Retainer (1) - Install
  8. GM4213876Courtesy of GENERAL MOTORS COMPANY

    Retainer (1) @ Radiator Support - Secure

  9. Wheel Speed Sensor Electrical Connector - Connect
  10. Install the appropriate front wheelhouse liner. Front Wheelhouse Liner Replacement
  11. Verify the repair is complete. Diagnostic Repair Verification
About FixVault