Tune-Up Notes: Notes

• IDLE SPEED ADJUSTMENT CAUTION:  Procedures and specifications for idle speed adjustment must be followed exactly as outlined. See " Hot (Slow) Idle RPM  " under Tune-Up. 
• HOT IDLE ADJUSTING CAUTION:  Vacuum release valve in neutral safety switch must not be disconnected while idle adjustment is being made. Disconnect and plug parking brake hose at vacuum cylinder when adjusting hot idle speed.
• HAZARD WARNING FLASHER CAUTION:  If brake pedal is depressed while hazard flasher is operating, both front and rear lights will stop flashing and burn steadily until brake pedal is released. This is normal operation, and should not be taken as an indication that anything is wrong.
  NOTE: For other items affecting Tune-Up, see Diagnosis, Testing & Trouble Shooting at rear of book and appropriate carburetor story in CARBURETION  section.