Removal & Installation: Injectors: Installation

Lubricate and install new "O" rings on fuel rail side of injectors. Install injectors into fuel rail with connector facing inboard. Lubricate and install new "O" rings into each injector port of intake manifold.
Install fuel rail assembly into intake manifold, making sure that each injector is properly seated. Install rubber grommets (flange side down) on fuel rail and install injector brackets in position. Secure each bracket with 2 screws and tighten screws to specifications.
Route electrical harness along bracket and secure to bracket. Injectors may need to be rotated to provide proper harness routing. Install front and rear fuel rails. Turn ignition on and off several times to pressurize fuel system. Check fuel rails for leaks.