Throttle Body Assembly: Removal

Remove air cleaner. Disconnect and clear ISC actuator, TPS and injector electrical connections. Remove throttle return springs, cruise control linkage, throttle linkage and downshift cable.

Fig 1: Assembled View of Throttle Body Assembly
From rear of throttle body, remove fuel inlet line, fuel return line, brake booster line, MAP hose and AIR hose, noting positions for installation. Remove PCV, EVAP and EGR hoses from front of throttle body, noting positions. Remove 3 throttle body mounting screws, throttle body and gasket.

NOTE: Removal of throttle body is not necessary unless throttle shafts or throttle body replacement is required.