Brake Indicator Control: Notes
WARNING: This page is about a different car, the 1990 Cadillac Seville, 1990 Cadillac Eldorado, 1989 Cadillac Seville, and 1989 Cadillac Eldorado. However, it is still accessible from the selected car via links, so may be relevant.
With the ignition switch in Run, Bulb Test, or Start, voltage is applied through IGN 1-ISO fuse 18 to the brake indicator. The circuit is completed to ground to light the indicator when the ignition switch is in the bulb test or start position, this acts as a lamp test for the indicator. With the ignition switch in Run the brake indicator lights if current flows to ground through.
- The Park brake Switch
- Brake Fluid Level Switch
- The Hydraulic Pressure Switch
Note: When the brake lamp is inoperative always test the bulb first