Section 49 (Engine Controls - Basic Diagnostic Procedures): Introduction

Before proceeding with basic diagnostic procedures, ensure testing procedure is followed, as some systems which may result in a no-start condition may cause a Diagnostic Trouble Codes (DTC) to be stored in the Engine Control Module (ECM). See 1989 SELF-DIAGNOSTICS -- ALLANTE or 1990 SELF-DIAGNOSTICS -- ALLANTE article.

If no-start condition still exists after checking and repairing all DTCs, perform a careful and complete visual inspection. Many problems result from mechanical breakdowns, poor electrical connections or damaged/misrouted vacuum hoses. Before condemning the computerized system, perform each test listed in this article.