BS08 Option 2

BS08 allows the ability to change the vehicle option content information stored in the BCM EEPROM. The BCM uses this option information to determine how to operate the displays and other electronic devices. Incorrect option content information in the EEPROM may cause many different problems. Upon selection of this override the option content information will be displayed as a number on the DIC. To determine the proper OPTION 2 number, calculate the sum of the applicable numbers. See BS08 OPTION 2 NUMBER  table.

If necessary, the WARMER and COOLER buttons can be used to increase and decrease the OPTION 2 number. When the correct number is reached, simultaneously press and hold the ELAPSED TIME and FUEL USED buttons for three seconds to permanently store the correct value in the EEPROM. The display will blank momentarily and then display the newly stored number.