PS11: Trans Over

Transaxle Shift Override. PS11 may be used to override Shift "A" and Shift "B" solenoid outputs and thus control shifts while in drive. The following conditions must be met to override shifts:

• Gear selector in D4
• Vehicle speed less than 65 MPH

If these conditions are not met, transaxle shift override will not be allowed and "= =" will be displayed. When PS11 is selected and the above conditions are met, the current commanded gear will be displayed.

Pressing the WARMER button will cause the transaxle to upshift and display the new commanded gear. Pressing the COOLER button will cause the transaxle to downshift and display the new commanded gear. A 3-2 downshift is not allowed above 58 MPH. A 2-1 downshift is not allowed above 30 MPH. If either is commanded while in overrides, the downshift will not occur and "= =" will be displayed while the COOLER button is pressed. While in transaxle shift override, the Torque Converter Clutch and Transaxle Pressure Control Solenoids will be disabled.