Basic Operation Test
- Drive vehicle at a speed greater than 25 MPH. Turn cruise control slider switch to ON position. Press and release SET switch. CRUISE indicator light should come on. Vehicle should maintain set speed.
- Press and hold SET switch for a few seconds, and then release it. Vehicle should decelerate until button is released and should then maintain new lesser speed. Move slider switch to R/A position, hold for a few seconds, and move switch back to ON position. Vehicle should accelerate until switch is moved back to ON position.
- Tap brake pedal. CRUISE indicator light should go out and vehicle should begin to coast. Move slider switch to R/A position and release. CRUISE indicator should illuminate and vehicle should accelerate to previously set speed.
- While cruising at a set speed, press accelerator momentarily and then release. Vehicle should accelerate and then coast back to set speed. While cruising at a set speed, tap slider switch to R/A position. Set speed should increase by one MPH for each tap (up to 10 taps).
- While cruising at a set speed, tap SET switch. Set speed should decrease by one MPH for each tap, until 25 MPH is reached, and then system should disengage. Move slider switch to OFF position. CRUISE indicator should go out and vehicle should begin to coast. If system does not function as specified, go to CRUISE CONTROL SYSTEM DIAGNOSIS.