Both Mirrors Do Not Operate
- Turn ignition off. Disconnect mirror control switch connector. Measure voltage between mirror control switch connector Orange wire terminal and ground. If battery voltage is present, go to next step. If battery voltage is not present, check 10-amp fuse No. C5 in trunk fuse block. If fuse is okay, check and repair open or short to ground in Orange wire circuit between mirror control switch and 10-amp fuse No. C5.
- Ensure ignition is off. Measure resistance between harness side of mirror switch connector Black wire terminal and ground. If resistance is less than one ohm, go to ONE MIRROR DOES NOT OPERATE IN UP/DOWN OR LEFT/RIGHT POSITION . If resistance is greater than one ohm, repair open in Black wire circuit between mirror control switch and ground.