Selecting Specific Test
- After selection of test type (such as IPC DATA?), the first available test code parameter will display. Refer to IPC SPECIFIC DIAGNOSTIC CODE PARAMETER DESCRIPTIONS and also refer to, in this article, IPC TROUBLE CODES table.
- If dashes (- - -) appear in CCC display, this indicates that selected specific test is not valid, not applicable or test conditions are wrong. While selecting a specific test, following actions may be taken to control display:
- Pressing HI button (fan up) on CCC will display the next highest specific test number in selected test type. If HI button is pressed when highest test number is being displayed, display will return to lowest test number.
- Pressing LO button (fan down) on CCC will display the next smaller test number in selected test type. If LO button is pressed when lowest test number is being displayed, display will return to highest test number.
- Pressing OFF button on CCC will stop test selection process and return display to next available test type for selected system.
- Pressing AUTO button on CCC will halt diagnostics and return system to normal display and operation.