Both Mirrors Do Not Operate
- Turn ignition off. Disconnect mirror control switch connector. Measure voltage between mirror control switch connector Orange wire terminal and ground. If battery voltage exists, go to next step. If battery voltage does not exist, check fuse No. C5 (10-amp) in trunk fuse block. Replace fuse if necessary. If fuse is okay, check and repair open or short to ground in Orange wire between mirror control switch and fuse block.
- Ensure ignition is off. Measure resistance between harness side of mirror switch connector Black wire terminal and ground. If resistance is less than one ohm, go to ONE MIRROR DOES NOT OPERATE IN UP/DOWN OR LEFT/RIGHT POSITION. If resistance is greater than one ohm, repair open in Black wire between mirror control switch and ground.