Cruise Control Module: Removal
- Remove cruise control cable from cruise control module clip. Twist cruise control cable guide tube 1/4 turn counterclockwise and remove from cruise control module. Carefully, without twisting ribbon, remove cruise control cable end from cruise control module ribbon.
- Slide EVAP filter/solenoid off of right strut tower mounting bracket. Slide EVAP filter/solenoid hose clamp down about 3" (76 mm). Remove EVAP hoses. Move EVAP canister up and out of way.
- Remove nuts from cruise control module mounting studs. Lift cruise control module from engine compartment to gain access to electrical connector. Disconnect cruise control module electrical connector.