FixVault
Home › Cadillac › 1998 › Catera › Repair and Diagnosis › Steering › Steering Wheel And Steering Column › Repair Instructions › Steering Wheel Inflator Module Coil Replacement › Installation Procedure

Installation Procedure

Fig 1: Inflatable Restraint Steering Wheel Module Coil Connector
GM210530Courtesy of GENERAL MOTORS CORP.
  1. Install the SIR coil.
  2. Connect the inflatable restraint steering wheel module coil connector
  3. Center the SIR coil. Refer to Steering Wheel Inflator Module Coil Centering 
    4. Fig 2: Identifying Upper Lower Steering Column Cover Screws
    GM210364Courtesy of GENERAL MOTORS CORP.
  4. Install the lower steering column cover
  5. Install the lower steering column cover screws
  6. Install the rubber protective cover to the ignition lock cylinder
    7. Fig 3: Identifying Upper Steering Column Cover Screws & Caps
    GM210357Courtesy of GENERAL MOTORS CORP.
  7. Install the steering wheel tilt lever. Refer to Tilt Lever Replacement - On Vehicle 
  8. Install the upper steering column cover
  9. Install the upper steering column cover screws
  10. Install the upper steering column cover screw caps
  11. Install the steering wheel. Refer to Steering Wheel Replacement 
  12. Enable SIR system. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM
About FixVault