FixVault

Without Rainsense Module

WARNING: This page is about a different car, the 1997 Cadillac Seville, 1997 Cadillac Eldorado, and 1997 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch to RUN position. Turn wiper switch to LO position. Disconnect wiper motor 6-pin connector. Connect test light between wiper motor case (ground) and Pink wire terminal of wiper motor 6-pin connector.
  2. Momentarily activate washer switch while observing test light. If test light is on when switch is released, replace wiper switch. If test light is off, replace wiper motor cover (circuit board). See Figure and Figure .