FixVault
Home › Cadillac › 1999 › Catera › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Cruise Control System › Repair Instructions › Cruise Control Release Switch Replacement › Installation Procedure

Installation Procedure

    Fig 1: Locating Cruise Control Release Switch Lugs
    GM159760
  1. Pull about 2/3-inch on the locking sleeve (2) in order to fully extend the actuating pin (1).
  2. Connect the switch connector.
  3. Apply the brake pedal while installing the switch into the brake pedal bracket.
    4. Fig 2: View Of Seating Cruise Control Release Switch
    GM159762
  4. Fully seat the switch into the bracket until the locking lugs snap into place.
    5. Fig 3: Identifying Cruise Control Release Switch & Bracket
    GM159768
    IMPORTANT: The switch adjusting pin self-adjusts when the brake pedal is returned to the non-applied position during the next step.
  5. Pull up on the brake pedal (1).
  6. Press the locking sleeve (2) into the switch.
  7. Install the LH front floor air outlet duct.
  8. Install the LH sound insulator.
  9. Verify the cruise control system operation.

About FixVault