DTC B1760: Cd Changer Not Responding: Testing
- Perform radio/audio system diagnostic system check. See RADIO/AUDIO SYSTEM DIAGNOSTIC SYSTEM CHECK under SELF-DIAGNOSTIC SYSTEM. After performing diagnostic system check, go to next step.
- Turn ignition off. Remove radio and disconnect electrical harness connector. Test E & C data line (Yellow wire) between radio harness connector terminal E1 and CD changer terminal No. 7 (terminal No. 10 on Bose(R) CD changer) for an open. If fault is located and repaired, go to next step. If fault is not located and repaired, go to step 4 .
- Reconnect all disconnected electrical connectors and components. Verify that radio and CD changer operate properly. If radio and CD changer operate and communicate properly, repair is complete. System is okay.
- Replace CD changer. After replacement, go to step 3 .