FixVault
Home › Cadillac › 2000 › DeVille DHS › Repair and Diagnosis (Single Page) › Body & Frame › Body, Cab Control Systems › Body Control Modules › Removal & Installation › Instrument Panel Module › Removal & Installation

Removal & Installation

  1. Use small hooked tool and reach behind center trim panel near top, next to A/C-heater control panel and pull out on each side. Pull towards rear of vehicle to disengage center trim panel retainers. Remove center trim panel.
  2. Depress and hold locking tabs located on the 4 corners of A/C-heater control panel and pull away from instrument panel to gain access to connectors. Disconnect electrical connectors from A/C-heater control panel and remove.
  3. To install, reverse removal procedure. After installation, IPM must be programmed. See PROGRAMMING  .
About FixVault