Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Snap the jounce bumper to the mounting cup. Use the 4WD 15-series and, the 2WD 25/35-series supplies.
- Install the jounce bumper. Use the 4WD 15-series and, the 2WD 25/35-series supplies.
- Install the nut to the jounce bumper stud. Tighten the nut to 30 N.m (22 ft lbs).
- Remove the safety stands.
- Lower the vehicle.